What are the common characteristics of high frequency melting furnace

1. Easy to use: It is ready to use without preheating and keeping warm. It can rise from room temperature to over 1000℃ in 30 seconds.

2. Fast sample preparation: fast heating speed can achieve rapid sample preparation, a batch of samples can be made in 10 minutes, and it can work continuously for 24 hours, which is especially suitable for users of intermittent sample preparation; the output of two pots and two molds is equivalent to silicon carbide rods The output of heating four heads and four pots and four molds is equivalent to the output of heating eight heads of silicon carbide rods.

3. Safety and environmental protection: equipped with exhaust fan to remove exhaust gas and no large-area heat radiation is beneficial to the health of the operator.

4. Mold forming: reduce the repair rate of the crucible and good sample consistency.

5. Low follow-up costs: no expensive consumables, no need to replace heating elements, refractory materials, etc. regularly.

6. Good energy-saving effect: only heating the crucible and mold.

7. Small amount of platinum and gold: The same output of other heating equipment can be achieved with a small amount of crucible and mold.

8. Equipment protection: There are fault display and protection functions for water shortage, overcurrent, overvoltage, and overtemperature.

9. There is no large-scale heat radiation, and the operator's working environment is good!

XRF high frequency sample melting furnace